4 Steps of Fire Damage Restoration
2/3/2020 (Permalink)
After a fire in your Austin, TX, building, fire damage restoration will need to be done. If you have not experienced this process before, you might not know exactly what to expect. The following are some of the things that will be done to get your building looking great again.
1. Inspection
Before anything else can be done, an inspection will need to take place so the restoration company can determine the extent of the damage. They will look over each area of the building and locate affected rooms and items.
2. Mitigation
After inspection, the next step in fire damage restoration is mitigation. This is done to keep damage from spreading and becoming worse. During this stage, missing areas will need to be covered with tarps or boards to keep out rain and debris. If water was used to put out the fire, areas may be blocked off to keep water from spreading.
3. Cleanup
Because smoke and soot travel through the air, smoke cleanup should be done in the area surrounding the primary damage, even if the flames did not reach that far. Smoke carries acidic elements that can cause damage and corrosion to surfaces as well as belongings. Electronic devices and equipment should be inspected before use to prevent damage.
4. Restoration
The final step in fire damage restoration is to make the repairs and restore the building to its previous condition. Some materials may need to be replaced, and if the fire was severe, workers may need to completely rebuild certain rooms or areas.
Repainting will likely need to be done as well.
Whether the flames have affected only a small area or have ruined a large portion of the building, you should have the commercial fire damage taken care of by a professional. A fire damage remediation company will be able to clean the area thoroughly and make repairs quickly without sacrificing quality, so you can get back to business.